Exterior Mold & Mildew Removal for Brick is one of the jobs we do most often in Detroit Lakes, MN. Typical jobs cost $250-$700, and you approve the price before we begin. For brick, that means low-pressure wash.
How we clean it
Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.
Cleaning brick safely
Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.
Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.
How often: Every 2-3 years for most homes.
Signs you need exterior mold & mildew removal for brick
- Black, green or gray spots and film
- Slippery walkways and decks
- Musty smell near shaded walls
- Growth that returns soon after rinsing
Why it gets dirty
- Shade, humidity and poor air flow
- Organic debris and pollen
- Surfaces that stay damp after rain or sprinklers
What you can do yourself
- Improve sun and air flow by trimming plants
- Keep gutters and sprinklers from soaking walls
- Clean small areas with an outdoor mildew cleaner, following the label
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
Common mistakes to avoid
- Blasting growth off without killing it, so it grows back fast
- Mixing cleaning chemicals, which can release toxic gas
- Damaging plants with runoff
How we handle exterior mold & mildew removal for brick
- Identify surfaces and growth
- Protect plants and fixtures
- Apply a solution that kills the growth
- Rinse at low pressure
- Post-treat where helpful to slow regrowth
This service is for outdoor surfaces. Mold inside the home, in attics or in wall cavities needs a mold remediation specialist, not a pressure washing company.
Typical exterior mold & mildew removal for brick prices
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for brick
- Pressure Washing for Brick
- Soft Washing for Brick
- House Washing for Brick
- Driveway Cleaning for Brick
- Sidewalk & Walkway Cleaning for Brick
- Patio Cleaning for Brick
- Paver Cleaning & Sealing for Brick
- Rust Stain Removal for Brick
- Graffiti Removal for Brick
- Efflorescence Removal for Brick
- Pre-Paint Washing for Brick
- Commercial Pressure Washing for Brick
- HOA & Apartment Pressure Washing for Brick
Local exterior mold & mildew removal for brick for Detroit Lakes, MN
In Minnesota, snow and slush that sit against the house leave a band of grime and mildew along the lower siding, and shaded north walls stay damp long after the thaw. A spring soft wash removes winter grime before it bakes on over the summer.
Much of Minnesota has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.
We provide exterior mold & mildew removal for brick across Detroit Lakes (ZIP codes 56501 and 56502) and nearby towns including Perham (20.1 mi), Pelican Rapids (20.4 mi), Hawley (22.7 mi) and Barnesville (29.5 mi). Call (555) 010-0000 for a free quote in Detroit Lakes.
Exterior Mold & Mildew Removal for Brick: frequently asked questions
How much does exterior mold & mildew removal for brick cost in Detroit Lakes, MN?
Exterior Mold & Mildew Removal for Brick typically costs $250-$700 for typical exterior growth on a home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for exterior mold & mildew removal for brick?
For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.
Is exterior mold & mildew removal for brick safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule exterior mold & mildew removal for brick?
Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.